THE VACQUBE is a compact 12V negative-pressure vacuum pump built for the shop — 75 kPa of vacuum, remote-controlled operation, and quiet enough that you'll forget it's running. Whether you're holding work to the bench, pulling a veneer bag, or running a vacuum chamber, one small box does all three.

• 75 kPa of Real Holding Power - That's 10.9 PSI, or roughly 22.1 inches of mercury, moving 20 liters per minute — about 3/4 CFM. Enough vacuum to lock work down hard and keep it there.
• RF Remote Control - The included key fob remote starts and stops the pump from across the shop. No reaching under the bench mid-setup, no walking back to the switch with a workpiece in your hands.
• Runs Quiet - The VacQube is genuinely quiet in operation — quiet enough to run continuously beside you without shop-wide racket or raised voices. No screaming compressor.
• Built to Run and Run - Tested past 1,376 hours of continuous runtime and still performing like new. This is a pump built for daily shop duty, not occasional use.
• Simple, Direct Connections - A 1/4" push-connect air port on the front gets you hooked up in seconds. A master on/off switch on the back and a 5.5mm jack for the included 12V plug-in power supply keep operation dead simple.
• Three Jobs, One Pump - Vacuum workholding, vacuum bagging, and vacuum chamber work — the VacQube handles all three. Pair it with the VacQport and VacQseals for a complete clamp-free workholding system.